毕业设计(论文)-DYL-300多功能钻机总体设计及变幅机构分析.doc
《毕业设计(论文)-DYL-300多功能钻机总体设计及变幅机构分析.doc》由会员分享,可在线阅读,更多相关《毕业设计(论文)-DYL-300多功能钻机总体设计及变幅机构分析.doc(27页珍藏版)》请在优知文库上搜索。
1、DYL-300多功能钻机总体设计及变幅机构分析摘 要目前国内的多功能钻机主要是进行钻孔,锚固孔,坑道施工,隧道施工,道路施工,露天采矿等。实践表明,多功能钻机不能很好的适应在不同的施工环境下进行不同的施工作业。国内部分单位引进了国外车载全液压动力头顶驱钻机,在实际使用过程中显示了其优越性,但价格比较高,配件供应周期长,使钻机的保养维修出现一些困难。因此亟需研发出具有自主知识产权,能够适应各种不同的施工环境,高效率的多功能钻机。国内在这方面的研究刚刚起步,虽然已经有国内厂商率先生产了首款多功能钻机,但其应用还不是十分广泛,主要是由于新钻机需要一个较长的适应过程才能进行使用,这样就延长了开采周期,
2、增加了开采成本。 针对上述问题,本论文通过对多功能钻机工作要求和设计要求的研究,自行设计一套适应性强,应用范围广泛的全液压多功能钻机。本文的主要内容及创新点包括:1. 了解多功能钻机的设计要求及工作领域,并提出对设计多功能钻机的总体要求。2. 设计一套全液压顶驱多功能钻机,利用钻机参数,通过优化设计、模块化设计来完成总体设计。3. 利用Pro/E三维软件对设计的钻机进行三维建模,并对变幅机构进行运动仿真,来了解钻机变幅机构的工作过程。关键字:多功能;钻机;总体设计;机构运动仿真AbstractAt present, the main multi-purpose drilling rig is
3、drilling, anchor holes, tunnel construction, tunnel construction, road construction, surface mining and so on. Practice shows that the multi-function rig is not well adapted in different environments with different construction of the construction work. Some units of the introduction of foreign dome
4、stic vehicle hydraulic power head drive drilling rig, shown in the actual use of its advantages, but the price is relatively high, spare parts supply cycle is long, so that maintenance of drilling rig has some difficulties. Therefore, developed with independent intellectual property rights is needed
5、, able to adapt to a variety of different construction environment, efficient multi-purpose rig. Domestic research in this area has just started, although domestic manufacturers have been the first to produce the first multi-function rig, but its application is not very extensive, mainly due to new
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 毕业设计 论文 DYL 300 多功能 钻机 总体 设计 机构 分析
